250ml Ametech Engine RESTORE Oil for inboard and outboard motors

One 250ml can of RESTORE will treat a one litre (1000cc) engine and is sufficient for any outboard motor. 

In 4-stroke engines RESTORE stays in the engine until the next oil change so you only need one application per oil change using about 10% volume of RESTORE to normal oil. In 2-stroke 'total loss lubrication systems' such as those used in the older outboards and smaller craft such as jet-skis where the oil is consumed in use, repeated applications will be necessary every time you replenish the oil, again using 10% volume of RESTORE to normal 2-stroke oil. 

The bigger 4-stroke inboard motors which work under heavier load will benefit more from a 1 litre can, which will give 30% by volume of RESTORE to normal oil and much better results.

The 250ml can has a ring-pull opening (similar to a Coca-Cola can) so cannot be re-sealed once opened.  It is important to shake the can well before using to agitate the CSL particles.  If you are not using a full 250ml can in one application we suggest you transfer the remaining oil to a container (preferably not plastic) with a sealed top, label it clearly as to its contents, and keep it out of the reach of children for future use.